北京橡胶接头|北京金属软管|北京弹簧减震器尽在北京普威减震器集团有限公司官方网站

发电机CASE SHOW

北京橡胶接头|北京金属软管|北京弹簧减震器尽在北京普威减震器集团有限公司官方网站

JA633008W橡胶减震器 电机橡胶减震器隔震隔音

周期:2017.12.12

服务内容:JA633008W橡胶减震器 电机橡胶减震器隔震隔音

简介:北京普威减震器集团有限公司官方网站为您介绍:JA633008W橡胶减震器信息,普威集团为电机设备推荐JA型橡胶减震器产品,该产品无论在隔音还是隔震方面,效果都达到了最佳效果,而且该款减震器用在电机上面的成本也不高。


JA633008W橡胶减震器 电机橡胶减震器隔震隔音
Rubber shock absorber of JA633008W rubber shock absorber for isolation and sound insulation

北京普威减震器集团有限公司官方网站为您介绍:JA633008W橡胶减震器信息,普威集团为电机设备推荐JA型橡胶减震器产品,该产品无论在隔音还是隔震方面,效果都达到了.*效果,而且该款减震器用在电机上面的成本也不高。
Shanghai Songjiang absorber group limited official website for your introduction: JA633008W rubber shock absorber, Songjiang group for electrical equipment recommended JA type rubber shock absorber products, the products in terms of sound insulation or isolation, has achieved the best results, and the shock absorber used in motor above do not cost high.



JA型阻尼橡胶减振器是由上下壳体和橡胶减振层构成,适用于各类1500转/分以上船用、陆用、航空用机械设备的振动、冲击隔离。其在额定荷载下固有频率为10Hz。结构简单,安装更新方便,使用安全可靠。安装方式多种多样,适用于平置、侧置及侧挂等多种安装形式。横向刚度高于纵向刚度,平置时横向稳定性更好些。
The JA damping rubber shock absorber is made up of upper and lower shells and rubber damping layer. It is suitable for vibration and shock isolation of all kinds of machinery with 1500 revolutions and above. The natural frequency is 10Hz under the rated load. The structure is simple, the installation and update is convenient, and the use is safe and reliable. Various types of installation are suitable for a variety of installation forms, such as flat, side and side hanging. The lateral stiffness is higher than the longitudinal stiffness, and the lateral stability is better when it is flat.


JA型橡胶减震器说明:
1、内部橡胶与铁件完全胶合,此外并附带有安全锁零件,以保障安全。
2、减振器在轴向压力及侧向压力可达到高度的减震效果。
3、适用于各类发电机、水泵、风机、空调机组等。
JA rubber shock absorber shows that:
1, the internal rubber and iron completely glued together with a safety lock, in addition to the safety of parts.
2, the shock absorber can achieve a high shock absorption effect in the axial and lateral pressure.
3. It is suitable for all kinds of generator, water pump, fan, air conditioning unit and so on.

 
JA型橡胶减振器在轴向压力及侧向压力可达到高度的减震效果,尤其用在发电机、引擎和系统方面,减震效果非常良好,运用范围大约在25Hz (1.500 rpm )。
内部橡胶与铁件完全胶合,可提*.好减震效果,此外并附带有安全锁零件,以保障安全。
The JA type rubber shock absorber can achieve high damping effect on axial pressure and lateral pressure, especially for generators, engines and systems. The damping effect is very good, and the application range is about 25Hz (1.500 RPM).
The internal rubber and iron piece completely glued, can provide the best damping effect, and also comes with safety lock parts, to ensure safety.

JA633008W橡胶减震器 电机橡胶减震器隔震隔音
 
适用设备:
水泵、柴油发电机、空压机及电机等诸多设备。  荷载范围:30-700Kg。
Applicable equipment:
Many equipment such as water pump, diesel generator, air compressor and motor and so on. Load range: 30-700Kg.

 
JA633008W橡胶减震器 电机橡胶减震器信息来源于北京普威减震器集团有限公司官方网站,如需了解更多减震器产品请点击:http://www.bjtpwy.com/jianzhenqi/



最新推荐:
·RUF液压压块机橡胶接头安装位置 ·【吉利动力总成义乌工厂】车削液车间橡胶接头
·【广州广汽丰田汽车工厂】橡胶接头合同 ·老师傅帮你汇总不锈钢波纹补偿器安装注意事项
·北京普威减震器集团有限公司 企业介绍 ·水泵安装橡胶接头时如何消除盲板力?
·【无锡兰桂坊项目】橡胶接头合同 ·【环保】工厂环保设备减震降噪解决方案
·一张图纸让你秒懂:蝶阀专用法兰与普通法兰的区别 ·对夹式软密封蝶阀专用法兰标准“橡胶接头专用法兰”